USB Port for Quick & Easy Setup: Simply connect the PS3037 to a PC, then use ViewPoint software to configure CT type, communication protocol, and other parameters.

Optional Display:The scrolling display can be used for quickly reading real-time values and performing diagnostics during setup. Without even connecting to a laptop, know that the meter is configured properly before leaving the job site.

Serial & Ethernet on the Same Unit.No longer be limited to choosing either Serial or Ethernet. All Ethernet units (PS3037-E-X) are equipped with both RS-485 and RJ-45 connections standard. Having both communication methods ensures maximum flexibility in the field.

DIN Rail Mounting:The PS3037 is compact enough to facilitate in-panel mounting. Use the angled mounting tabs to install flush on the side or back of the panel wall. Or, use the built-in DIN rail channel for quick and easy mounting near the circuit panel.

No Integral Voltage Leads:Voltage leads are now user-supplied. Because of this, there is no distinction between "US" and "INTERNATIONAL" PowerScout 3037 instruments. All configurations of the PS3037 can be used throughout the world (50/60Hz)

Lower Price:Just need Serial communications without a Display? Save 20% compared to the previous-generation PowerScout 3 Plus. PS3037s with Display and Ethernet (PS3037-E-D) are the same price as the previous PowerScout 3.

Revenue-Grade Performance: ANSI C12.20-2010 qualified Class 0.2

Over 50 measured parameters for energy measurement, monitoring and diagnostics. Monitors voltage, current, power, energy, and many other electrical parameters on single and three-phase systems.

Single or 3-phase energy and power meter for submetering applications

Choose from a full range of Split-Core or RoCoil™ Rogowski-style current transformers

Patented PhaseChek™ LED indicators ensure correct CT orientation during installation

Line-Powered: No external power, beyond the service under measurement, is required

Equipped with industry-standard Modbus and BACnet Communications

Standard Pulse Output: Send kWh or other pulses to an external device

Data updates occur every 0.5 second

ViewPoint Setup Utility software: Verify meter installation, switch between communication protocols, and check real-time values before leaving the job site. ViewPoint 4.0 or later required for the PowerScout 3037.

UL Listed

CE Mark

INCLUDES:
3 CT-SCM-0400 400 AmpSplit Core CT'S, 1.25" Window